Steel Taping Machine

Detailed Information

Application:

This cable taping line is designed to apply a helical layer of copper or aluminum wire over a cable core. The final product produced by this wire taping machine is, mainly low voltage cable, used to connect consumer low voltage system by the power utility, where the phase conductor is the central aluminum conductor and the neutral conductor is the wire layer. The final product can also be a medium voltage cable and the copper wires are the cable shield.

Electric Control System:

This cable taping line is designed to apply a helical layer of copper or aluminum wire over a cable core. The final product produced by this wire taping machine is, mainly low voltage cable, used to connect consumer low voltage system by the power utility, where the phase conductor is the central aluminum conductor and the neutral conductor is the wire layer. The final product can also be a medium voltage cable and the copper wires are the cable shield.

Technical Information:

Model 600/2 800/2
Cable Diameter Range 20mm to 160mm 60mm to 160mm
Taping overlap 0-50% 0-50%
Rotate speed 500r/min 500r/min
Taping Pitch 9-160mm 9-160mm
Taping Tension 2.5-15daN 2.5-15daN
Motor 7.5kw 7.5kw
Material of Tape Water proof tape, copper tape, buffering tape, plastic tape ect.

Line Composed by following items:

  • Pay off
  • Section to section device
  • Taping machine
  • Meter counter
  • Belt Caterpillar
  • Take-up
  • Electrical Control System

Machine Details

APPLICATION

For cable extrude or insulation, mainly used for Automotive Wire, Building Wire, Power Cables extrusion

APPLICATION MATERIAL

PVC,PE, LSZH (Low Smoke Zero Halogen)

EXTRUSION TYPE

Single Layer, Double Layer,Three Layer,Double+Strip

 SUITABLE DIA. OF WIRE 

1.5-7.0MM

Video of Working Process: